Je winkelwagen is momenteel leeg
Beschikbaar in de winkel
SluitenPreparation for instant shine and protection of car paint. It gives the surface a deep shine, slippery and hydrophobic effect. It masks micro scratches, causing the surface to stay clean for longer. A product with a pleasant fragrance.
ideal for shiny car paintwork
for use on cars with sterile paintwork as well as waxes and coatings
fills microscratches and cavities on painted surfaces
brings out the depth of colour from the painted elements
forms a hydrophobic or water repellent coating
the product can be applied on both, dry and wet lacquer
Quick Detailer is also suitable as a lubricant for clay
safe for cleaned surfaces, if applied as recommended
preparation is ready to use and does not require dilution
before applying Quick Detailer paintwork shining preparation, it is recommended to thoroughly prewash the vehicle
wet application of Quick Detailer: spray the product with about 20 ml, rinse the excess and dry the surface with a towel; do not allow to dry!
application to dry paintwork: use two soft microfibre towels, spray the agent onto the microfibre and rub into the surface, with a second microfibre wipe off the excess of Quick Detailer to achieve shine. Recommended quantity per car: 10–30 ml.
apply the product element by element
overlapping too much product results in smudges
store in a dry and cool place at 5–25℃
do not expose to freezing or overheating
before application, make sure that the surface is clean and cool
do not apply in direct sunlight and when exposed to wind!
keep out of reach of children
product dedicated to rim cleaning
improved gel formula allows for longer dirt penetration and slower evaporation
the product adheres to the wheel surface in the form of an even gel glaze, which makes it flow off the surface longer.
alkaline pH
product ready to use
safe for cleaned surfaces, if applied as recommended
the product does not contain the acid responsible for the bleeding effect
grape fragrance
shake the bottle before use
spray rims generously with the gel
for a better effect, use a brush to separate the dirt
for dirt that is difficult to remove, allow the agent to act on the surface for several minutes
rinse with water, preferably under pressure
dry the surface with compressed air or clean microfibre for a perfect finish
if necessary, repeat the above steps
before first use, test the product in a less visible place
do not use on non-original wheel paint
do not use on polished rims, bare aluminum
the product contains a corrosion inhibitor, it inhibits corrosion processes
during application, protect your skin, the product may cause skin irritation
store in a dry and cool place at 10–25℃
do not expose to freezing or overheating
do not leave to dry out
before application, make sure that the surface to be cleaned is cool
do not use in direct sunlight and when exposed to wind
keep out of reach of children
product for professional use